Sign-Monument-2004CITY OF CAMPBELL
Community Development Department - Current Planning
March 9, 2004
Mr. Ken Fisher
Sign Classics
1014 Timothy Drive
San Jose, CA 95133
Re:
Sign Permit Application
File No.: PLN2004-00024
540-550 Division Street
Dear Mr. Fisher:
The Planning Division has reviewed and conditionally approved your s' n application
(PLN2004-00024) for one new free standing sign located at the above reference address. The
new sign is a 50 square-foot multi-tenant monument sign and is five feet tall.
This Sign Permit has been approved subject to the following conditions of approv 1:
1. The applicant shall obtain any necessary building permits from the Buildin Division prior
to sign installation.
2.
The sign shall be fabricated and installed per the approved plans dated as pproved by the
Planning Division on March 9, 2004.
3.
The sign shall be maintained in good condition at all times and shall be rep red or replaced
as necessary.
4.
No exterior illumination is approved as part of this sign permit. Any illu nation shall be
brought back to the Planning Division for review and a modification to the s gn permit.
If you should have any questions, please do not hesitate to contact me at (408) 66-2193 or by
email at stephaniew@cityofcampbell.com.
Sincerely,
~UÍf¿W('l~
Stephanie Willsey . U
Planner I
enc1:
Stamped Approved Plans
cc:
GeoffBradley, Senior Planner
Dell Associated II, 511 Division Street, Campbell, CA 95008
70 North First Street. Campbell, California 95008- t 436 . TEL 408.866.2140 . FAX 408.866.8381 . DD 408.866.2790
Dec. 19,2003
Mrs. Rachel Pozzi
South Bay Development
1690 Dell Avenue
Campbell, CA 95008
796-0042 Fax 379-6782
Re: Dell Avenue Monuments
RECL~ ~"ED
2004
CITY OF C MPBELL
PLANNI G DEPT.
(2) Custom fabricated aluminum monuments per attached drawing.
The signs will measure 5' x 10'-0" x 18". The (5) sign panels on
the front of each sign will be fabricated from 3/16" plate aluminum.
They will have studs welded to the back and will float off the sign
faces with 1/2" spacers. They will be painted white and be removable
for repainting if needed. The main sign cabinet will be texcoated
and painted gray to match the gray squares on the building. The
address at the bottom will be routed out of 1/2" acrylic painted
black, they will be pin mounted with 1/2" spacers. The company
name on the bottom panel will be black vinyl.
Sales Tax
Installation
City Permits
-f.r- (J ;r
') 5í-, '> 11)
k
\ JC2rÞt ðJeJ