PD Permit - Withdrawn - 2014of ~ a,y~
=, ~
.,
., r
`:
/ ~ t~ X r: l l .~ K\~
CITY of CAMPBELL
Community Development Department
May 29, 2014
Kurt Anderson
120 W. Campbell Ave., Ste. D
Campbell, CA 95008
Re: File No: PLN2012-137
Address: 199 Sunnyside Ave.
Application: Planned Development Permit
Status: Incomplete (2nd Submittal)
Dear Mr. Anderson,
Thank you for your April 30, 2014 submittal of revised application materials for a Planned
Development Permit application. Based on a review of the revised materials, your application
remains incomplete. The following additional information and revisions to the plans are needed
in order to continue processing of this application.
ADDITIONAL MATERIALS
1. Tree Removal Permit: A completed Tree Removal Permit application, and associated
fees, was not provided. Please return the enclosed application, identifying removal of any
tree 12-inches in diameter (DBH) or greater, excluding fruit trees.
2. Color/Material Board: Provide a revised color/material board that reflects the revised
design.
3. Color Elevation/Renderin~: Provide a color elevation or rendering, either on the Cover
Sheet or as a separate sheet, within the project plans.
4. Unnecessary Sheets: Please remove the interior elevation and electrical sheets (Sheets
A6.0, A6.1, A7.0, A7.1, and A8.0), as they are more appropriately included in the
construction drawing plan set.
70 ~1orCh f=irst Street • Campbell, California 95008-t 435 • TES- 408.856.2140 • F,~x 408.871.5140 • ~iDI) 408.856.2~9U
s ~no~„ urc~~~ c-n ru~ra
PLN2012-137 ~ 199 Sunny: Ave. Page 2 of 2
PLAN REVISIONS
5. Data Table (Sheet 0.0): Provide asquare-footage value for the "Usable Open Space" area,
which is open area between the two structure
6. Proposed Site Plan (Sheet A1.0): The following must be revised on the Proposed Site Plan:
a. Correct the print size; the drawing does not conform to 10" scale.
b. Revise the placement and/or size of the labels as they are impinging on the dimension
lines and notations.
c. Indicate proposed driveway paving materials (e.g., concrete, pavers, etc.).
d. Indicate all proposed and/or new fencing, indicating height and materials, including
the masonry pilasters and wrought iron gate indicated on the Landscaping Plan.
7. Floor Plans (Sheet A2.0): Revise the notation for the first floor "office" to indicate
"bedroom".
8. Elevations (Sheets A3.0): Include the following height measurement on all proposed
elevations. Please note that all measurements must be in relative values (feet and
inches) and elevation benchmark (AMSL) levels established by the required grading
and drainage plan:
(1) Existing grade
(2) Finished grade
(3) Maximum structure height as measured from finished grade
(4) Finished floors as measured from finished grade
(5) Plate heights as measured from finished grade
9. Conceptual Landscaping Plan (Sheet L-1): Replace the proposed synthetic lawn with live
groundcover material that can function as the "grassy swale" on the grading plan.
When resubmitting the project plans, please provide one 24" x 36" and two 11''x17" copies of
the revised plans. ]'lease additionally provide the revised plans electronically as a single PDF
file. Also provide a response letter itemizing the specific revisions made and/or additional
materials provided.
If you should have any questions, I may be contacted at (408) 866-2193 or by email at
Sincerely
Daniel Fama
Associate Planner
encl: Tree Removal Permit Application
cc: Aki Snelling, Planning Manager
Doris Quai Hoi, Assistant Engineer
Roger Thibodeau, 199 Sunnyside Ave., Campbell, CA 95008