Sign - Platinum Salon - 2016o~~~'AM
A
~ ~,~a ,~ ~
~ .~ni= . 4 ~
c, t
o $,~~ o
~ ~
y
T ..
4
r'kcri auv
CITY of CAMPBELL
Community Development Department
January 26, 2016
Clay Morganparks
2105 Winchester, Suite 13 0
Campbell, CA 95008
Re: Sign Permit Application
File No.: PLN2016-25
Address: 2105 Winchester Blvd., Suite 130 ~ Platinum the salon
Dear Mr. Morganparks:
Thank you for your January 25, 2016 application for a sign permit for the aforementioned
address.'The Planning Division has conditionally approved your application (PLN2016-25) for a
new 25.5 square foot permanent wall sign for "Platinum the salon" located at 2105 Winchester
Boulevard, Suite #130. The Planning Division finds the signs, as conditioned below, to be
consistent with the site's approved Master Sign Program.
This Sign Permit has been approved subject to the following Conditions of Approval:
1. The signs shall be fabricated and installed per the approved project plans, dated as received
on.January 25, 2016, except as modified below:
General:
1. The sign shall be flush mounted to Ithe building facade.
2. The sign shall include drain holes where the plans indicate "1/4-inch weep
holes as needed".
3. The disconnect switch shall be visible where not clearly s ecified on th
P
project plans (shown interior to wall). /
4. The project plans shall reflect the address and suite number of the tenant ~/
space.
ii: Raceway Box:
1. The proposed raceway box shall have an aluminum square tube frame with ~~
.063" aluminum cladding where not specified on the plans.
2. The power supply shall be housed within the raceway. .
3. The left and right sides of the raceway shall be removable for service, where
not specified.
PLN2016-25 ~ 2105 Winchester Blvd. Page 2 0~
4. No visible fasteners shall be permitted on the face of the raceway, where not - /
clearly specified. ~/
iii. Face Lit Channel Letters: /
/
1. The channel letters shall be a minimum of 3.5-inches in depth, where shown ds
at 3-inches.
2. The trim cap shall be 1-inch wide and fabricated from Jewelite where not
specified. /
/
3. The channel letters shall have a black return where indicated as having "Color ~/
SW 7676 Seal Skin" (effectively grey) on the project plans.
4. Channel letters shall be mounted flush to the metal raceway.
5. The acrylic face of the letters shall be 3/16-inch thick (translucent) with the
specified color digitally printed (white & Pantone 518 C) where not specified
on the project plans.
2. Prior to building permit submittal, the applicant shall provide four 11-inch x 17-inch copies
of the sign plans reflecting all revisions indicated in Condition of Approval #1.
3. The applicant shall obtain any necessary building permits from the Building Division prior to
sign installation.
4. The approved signage shall be maintained in good condition at all times and shall be repaired
or replaced as necessary to maintain ahigh-quality appearance.
If you have any questions regarding this letter, please contact me at (408) 866-2142 or
S teph enR@cityo fcampb el l . com.
Sincerely,
Stephen Rose
Associate Planner
cc: Merrill Gardens at Campbell, LLC c/o Ollie Peterson 1438 Fairview Avenue Suite 300, Seattle WA 98102
Pillar Properties, 1938 Fairview Avenue East, #300, Seattle WA, 98102
encl: Approved Plans
Merrill Gardens Master Sign Program; Sheet OS